NEC Univerge SV8100 Features And Specifications Manual page 1509

UNIVERGE SV8100
Program
Program Name
Number
24-02-02 System Options for Transfer –
MOH or Ring back on
Transferred Calls
Assign Trunks As Automated Attendant Trunks – Method 1
Program
Program Name
Number
22-02-01 Incoming Call Trunk Setup
22-07-01 DIL Assignment
UM8000 Mail
Description/Comments
Enable/Disable MOH on Transfer.
If set to 0, a transferred caller
hears Music on Hold while their
call rings the destination
extension. If set to 1, a transferred
caller hears ring back while their
call rings the destination
extension. For this option to work
with voice mail, the transferred call
must be an unscreened transfer.
Description/Comments
Assign Service Type 4 to each
trunk you want to ring into Voice
Mail as a Direct Inward Line (DIL).
Assign the destination extension
or Department Calling Group for
each DIL incoming trunk. A DIL
rings an extension directly, without
any other Access Map or Ring
Group Programming.
Use Program 22-02 to designate a
DIL trunk.
If all Voice Mail ports are in the
same Extension (Department)
Group, the DIL rings another
Voice Mail port if its assigned port
is busy.
Assigned Data
1
0 = Hold Tone
1 = Ring Back
Tone
(default = 0)
Assigned Data
1
0 = Normal
1 = VRS (second dial
tone if no VRS
installed)
2 = DISA
3 = DID

4 = DIL
5 = E&M Tie line
6 = Delayed VRS
7 = ANI/DNIS
8 = DID(DDI) Mode
Switching
(default = 0)
Extension Number
(maximum eight digits)
(default not assigned)

Issue 7.0
Level
2 3

Level
2 3
2 - 1481