NEC Univerge SV8100 Features And Specifications Manual page 888

Issue 7.0
Related Features
Central Office Calls, Answering
Central Office Calls, Placing
Direct Inward System Access (DISA)
Multiple Trunk Types
Warning Tone for Long Conversation
Guide to Feature Programming
The Level 1, Level 2 and Level 3 columns indicate the programs that are assigned when programming
this feature in the order they are most commonly used. These levels are used with PCPro and WebPro
wizards for feature programming.
Level 1 – these are the most commonly assigned programs for this feature.

Level 2 – these are the next most commonly assigned programs for this feature.

Level 3 – these programs are not often assigned and require an expert level working knowledge of

the system to be properly assigned.
Program
Program Name
Number
14-01-14 Basic Trunk Data Setup – Long
Conversation Cutoff
14-01-15 Basic Trunk Data Setup – Long
Conversation Alarm Before Cut
Off
20-06-01 Class of Service for Extensions
20-13-02 Class of Service Options
(Supplementary Service) – Long
Conversation Cutoff (Incoming)
2 - 860
Description/Comments
Enable/Disable a trunk ability to
disconnect incoming and outgoing
central office calls automatically.
Enable/Disable the Long
Conversation Alarm for each
trunk.
Assign a Class of Service (1~15)
to extensions.
Turn Off or On an extension user
ability to use Long Conversation
Cutoff for incoming calls.
UNIVERGE SV8100
Assigned Data
1
0 = Disable

1 = Enable
(default = 0)
0 = Disable

1 = Enable
(default = 0)
Day Night/Mode: 1~8
Class of Service of
Extensions (1~15)
Default:
Extension port 101 =
Class 15
All other extension port
= Class 1
0 = Off
1 = On

(default = 0 for
COS 1~15)
Long Conversation Cutoff
Level
2 3
