NEC Univerge SV8100 Features And Specifications Manual page 1768

Issue 7.0
Guide to Feature Programming
The Level 1, Level 2 and Level 3 columns indicate the programs that are assigned when programming
this feature in the order they are most commonly used. These levels are used with PCPro and WebPro
wizards for feature programming.
Level 1 – these are the most commonly assigned programs for this feature.

Level 2 – these are the next most commonly assigned programs for this feature.

Level 3 – these programs are not often assigned and require an expert level working knowledge of

the system to be properly assigned.
Program
Program Name
Number
11-10-20 Service Code Setup (for System
Administrator) – VRS - Record/
Erase Message
20-06-01 Class of Service for Extensions
20-07-13 Class of Service Options
(Administrator Level) – VRS
Record (VRS Msg Operation)
20-17-01 Operator Extension – Operator's
Extension Number
2 - 1740
Description/Comments
Define the service code to record
or erase a VRS message.
Assign a Class of Service (1~15)
to extensions.
Turn Off or On an extension user
ability to record, listen to, or erase
VRS messages.
Designate an extension operator.
This setting determines which
phone will show the message
notification for outside caller
messages.
Voice Response System (VRS) Embedded VRS
UNIVERGE SV8100
Assigned Data
1
MLT, SLT
(default = 616)
Day Night/Mode: 1~8
Class of Service of
Extensions (1~15)
Default:
Extension port 101 =
Class 15
All other extension port
= Class 1
0 = Off
1 = On
(default = 0 for
COS 1~14)
(default = 1 for
COS 15)
Up to eight digits
(default = ext. 101)
Level
2 3



