NEC Univerge SV8100 Features And Specifications Manual page 1158

Hide thumbs Also See for Univerge SV8100:

Table of Contents

Program Name

Extension Ringdown (Hotline)

To place a call if your extension has ringdown programmed:

Lift the handset.

If you want to place a trunk call, press a line key before lifting the handset.

Depending on the setting of your ringdown timer, you may be able to dial an Intercom call before your ringdown

goes through.

If the destination has Handsfree Answerback enabled, your call voice announces. If the destination has Forced

Intercom Ringing enabled, your call rings.

To answer a call if you are another extension ringdown destination:

Speak toward telephone to answer incoming voice announcement.

Lift the handset or press Speaker to answer ringing Intercom call.

Description/Comments

Program the ringdown (Hotline)

source and destination (target)

number, up to 24 digits (512

Hotline assignments). Remember

to include the trunk access code

(usually 9) in front of the number

when dialing outside numbers.

When programming Speed Dial –

System numbers as the

destination, the entry should be

753 + bin number (the service

code for Speed Dialing and the

Speed Dial bin number).

UNIVERGE SV8100

Assigned Data

, Pause, Hook

@ (Code to wait for

answer supervision)

(maximum 24 digits)

(default not assigned)

Ringdown Extension, Internal/External