NEC Univerge SV8100 Features And Specifications Manual page 1358

Issue 7.0
Program
Program Name
Number
51-05-01 NetLink Timer Settings – Keep
Alive Sending Interval
51-05-02 NetLink Timer Settings – Keep
Alive Response Waiting Time
51-05-03 NetLink Timer Settings – Primary
Search Packet Sending Interval
51-05-04 NetLink Timer Settings – Primary
Search Time Maximum Value
51-05-05 NetLink Timer Settings – Top
Priority Primary Detection
Packet Sending Interval
51-05-06 NetLink Timer Settings – Primary
Compulsion Specification Trial
Maximum Time
51-05-07 NetLink Timer Settings – Socket
Refresh Time
51-06-01 NetLink Primary Automatic
Integration Setting – Primary
Integration Right or Wrong
51-06-02 NetLink Primary Automatic
Integration Setting – Package
Reset Timing Option
51-07-01 NetLink Primary Compulsion
Specification Setting – Forced
Change Primary System
Enabling
2 - 1330
Description/Comments
This is the Keep Alive sending
time from the Secondary system
to confirm communication with the
Primary system.
This is the time the Secondary
system waits for a response from
the Primary system before cutting
off communication.
While searching the Primary
system, the system sends a
packet at this time.
Total time of Primary system seek
time.
When current Primary system is
not Top Priority Primary System,
the system sends packet to check
if Top Priority System exists.
When the forced change Primary
command is executed, the system
searches the new Primary system
for this time.
If the IP connection becomes
unstable, the keep-alive function
does not work. To avoid this, if
there is no data traffic for this time,
the socket is refreshed.
When LAN cable was divided,
multiple Primary systems may
appear. If the LAN connection is
recovered, multiple NetLinks exist
in the network. When this option is
enabled, NetLink is composed
around Top priority Primary
System.
When Primary System Automatic
Integration is done, all packages
of secondary systems reset. This
option can select the timing of
package reset.
Set this item whether the Forced
Change Primary is available or
not.
UNIVERGE SV8100
Assigned Data
1
1~3600 (seconds)
(default = 5)
0, 5~10800 (seconds)
(0 = infinity)
(default =20)
1~3600 (seconds)
(default = 5)
5~10800 (seconds)
(default = 20)
1~3600 (seconds)
(default = 10)
1~10800 (seconds)
(default = 30)
20~3600 (seconds)
(default = 40)
0 = Off
1 = On
(default = 0)

0 = Reset when all
packages are in idle
condition
1 = Anytime
(default = 0)
0 = Disable
1 = Enable
(default = 1)
SV8100 NetLink
Level
2 3








