NEC Univerge SV8100 Features And Specifications Manual page 1194

Issue 7.0
Related Features
Programmable Function Keys
Transfer
Guide to Feature Programming
The Level 1, Level 2 and Level 3 columns indicate the programs that are assigned when programming
this feature in the order they are most commonly used. These levels are used with PCPro and WebPro
wizards for feature programming.
Level 1 – these are the most commonly assigned programs for this feature.

Level 2 – these are the next most commonly assigned programs for this feature.

Level 3 – these programs are not often assigned and require an expert level working knowledge of

the system to be properly assigned.
Program
Program Name
Number
15-02-05 Multiline Telephone Basic Data
Setup – Transfer Key Operation
Mode
15-07-01 Programmable Function Keys
2 - 1166
Description/Comments
Set the operating mode of the
extension Transfer key. The keys
can be for Call Transfer, Serial
Calling or Flash. When selecting
Flash (2), refer also to Program
81-01-14.
Assign a programmable key as a
Serial Call key (code 43).
UNIVERGE SV8100
Assigned Data
1
0 = Transfer
1 = Call back
2 = Hook
(default = 0)
Line Key 1~48
0~99 (Normal Function
Code 751 by default)
 
00 ~ 99
(Appearance Function
Code) (Service Code
752 by default)
Level
2 3


Serial Call