NEC Univerge SV8100 Features And Specifications Manual page 1322

Issue 7.0
Default Setting
None
System Availability
Terminals
All Multiline Terminals and Single Line Telephones
Required Component(s)
None
Related Features
None
Guide to Feature Programming
The Level 1, Level 2 and Level 3 columns indicate the programs that are assigned when programming
this feature in the order they are most commonly used. These levels are used with PCPro and WebPro
wizards for feature programming.
Level 1 – these are the most commonly assigned programs for this feature.

Level 2 – these are the next most commonly assigned programs for this feature.

Level 3 – these programs are not often assigned and require an expert level working knowledge of

the system to be properly assigned.
Program
Program Name
Number
11-15-12 Service Code Setup,
Administrative (for Special
Access – Extension Data Swap
20-13-42 Class of Service Options
(Supplementary Service) –
Extension Data Swap Enabling
2 - 1294
Description/Comments
Ext. Data Swap = xxx (service
code in accordance with Program
11-01).
Turn Off or On an extension user
ability to use Station Relocation.
UNIVERGE SV8100
Assigned Data
1
MLT

(default not assigned)
0 = Off
1 = On
(default = 1 for
COS 1~15)
Station Relocation
Level
2 3
