NEC Univerge SV8100 Features And Specifications Manual page 1487

UNIVERGE SV8100
Program
Program Name
Number
10-20-01 LAN Setup for External
Equipment – TCP Port
10-26-01 IP System Operation Setup –
Peer to Peer Mode
10-26-03 IP System Operation Setup – SIP
Peer to Peer Mode
11-07-01 Department Group Pilot
Numbers – Dial
14-02-23 Analog Trunk Data Setup –
Caller ID Receiving Method
15-03-03 Single Line Telephone Basic
Data Setup – Terminal Type
UCB (Unified Communications for Business)
Description/Comments
Define the TCP port (0~65535)
when communicating to the CTI
server (type 1).
Enable/Disable the Peer to Peer
feature for SIP IP stations.
Set Peer to Peer to 0 when

using UCB.
Enable/Disable the Peer to Peer
feature for SIP IP stations.
Set Peer to Peer to 0 when

using UCB.
Assign a Department Group pilot
number for the Voice Mail (eight
digits maximum). The extensions
are assigned to the group in
Program 16-02-01.
Rings extension before receiving
Caller ID (1) or after receiving
Caller ID (0).
Enter 1 for this option to allow a
single line port to receive DTMF
tones after the initial call setup.
Enter 0 to have the port ignore
DTMF tones after the initial call
setup. For Voice Mail, always
enter 1 (e.g., receive DTMF
tones).
Assigned Data
1
0~65535
default:
External Device 1 (CTI
Server) = 0
External Device 2
(ACD MIS) = 4000
External Device 5
(SMDR Output) = 0
External Device 6 (DIM

Output) = 0
External Device 11
(O&M Server) = 8010
External Device 12
(Traffic Report Output)
= 0
External Device 13
(Room Data Output for
Hotel Service ) = 0
0 = Off
1 = On

(default = 1)
0 = Off
1 = On

(default = 1)
Up to eight digits
(default not assigned)

0 = Wait Caller ID
1 = Immediate Ring
(default = 1)
0 = Normal
1 = Special
(default = 0)

Issue 7.0
Level
2 3

2 - 1459