Lan Connection - NEC Univerge SV8100 Features And Specifications Manual

Issue 7.0

LAN Connection:

Program
Program Name
Number
10-12-09 CD-CP00-US Network Setup – IP
Address
10-20-01 LAN Setup for External
Equipment – TC Port
10-20-03 LAN Setup for External
Equipment – Keep Alive Time
For additional SMDR programming options, see
Programming Notes:
If the system is programmed to display the date (Program 35-02-14=1), the date is displayed

regardless of the setting for display of trunk name (Program 35-02-03) and only the trunk number is
printed.
For example, if trunk port 049 has a trunk name of PRI Ch1, if Program 35-02-03 = 0 (name) and

Program 35-02-14 = 1 (display date), then SMDR shows 8/19 049. However, if Program 35-02-14
= 0 (date not displayed), the SMDR shows PRI Ch1.
2 - 1208
Description/Comments
When using an IP connection, set
up the IPLA IP address used to
connect from the CommAnalyst
PC to the system.
When using an IP connection,
define the TCP port used for
communicating to the
CommAnalyst (External Device 5
= SMDR, Entries: 0~65535). This
entry must match the entry made
in the CDM setup with the
CommAnalyst program.
Define the TCP port/address/etc.
Station Message Detail Recording on page
UNIVERGE SV8100
Assigned Data
0.0.0.0~
126.255.255.254
128.0.0.1~
191.254.255.254
192.0.0.1~
223.255.255.254
(default =
192.168.0.10)
0~65535
default:
External Device 1 (CTI
Server) = 0
External Device 2
(ACD MIS) = 4000
External Device 5
(SMDR Output) = 0
External Device 6 (DIM
Output) = 0
External Device 11
(O&M Server) = 8010
External Device 12
(Traffic Report Output)
= 0
External Device 13
(Room Data Output for
Hotel Service ) = 0
1~255 (seconds)
(default = 30 seconds)
SMB8000 Communications Analyst
Level
1 2 3



2-1267.