NEC Univerge SV8100 Features And Specifications Manual page 1070

Hide thumbs Also See for Univerge SV8100:

Table of Contents

The following table indicates what condition the service codes and Programmable Function

key can be used.

ICM Dial Tone or Busy Tone

Calling Another Extension

Receiving a Personal Park Recall

A user can display the Caller ID of a call in Park if Caller ID is enabled (1) in Program

Park keys can be assigned on DSS consoles.

Calls on virtual extension keys cannot be put in Personal Park if Program 15-18-01 is set to

Land on the key (1).

Function keys simplify Park operation.

One Touch keys programmed for Park Hold Service Code cannot be used to park calls

without using Hold or Transfer.

Call Park – Step Call is supported in the local system only.

A parked call cannot be retrieved from Hold Dial Tone (Second dial tone).

When a call is parked from a virtual extension, the virtual extension is released.

When parking a call from a virtual extension, Programs 15-02-21 and 15-18-01 must be set

Park Group assignment is by the terminal extension, not the virtual extension.

When a call parked from a virtual extension recalls, it will ring the terminal the virtual

extension is programmed on, not the virtual extension key.

Default Setting

Not Available

Not Available

Using 3-Digit

Using 1-Digit

Service Code

Not Available

(with outside call

on hold and when

called extension

does not answer)

Not Available

UNIVERGE SV8100