NEC Univerge SV8100 Features And Specifications Manual page 978

Issue 7.0
Program
Program Name
Number
20-09-02 Class of Service (Incoming Call
Service) – Caller ID Display
21-12-01 ISDN Calling Party Number
Setup for Trunks
21-13-01 ISDN Calling Party Number
Setup for Extensions
22-11-01 DID Translation Number
Conversion – Received Number
22-11-02 DID Translation Number
Conversion – Target Number
80-01-01 Service Tone Setup – Tone 44,
External Dial Tone
2 - 950
Description/Comments
Turns Off or On the Caller ID
display at an extension.
Assign Calling Party Numbers for
each trunk (maximum 16 digits per
entry). When a call is made by an
extension which does not have an
Extension Calling Number
assigned (Program 21-13), the
system sends the calling number
for the ISDN trunk defined in
21-12. If the Calling Party Number
is assigned in both Program 21-12
and Program 21-13, the system
sends the data in Program 21-13.
Assign each extension a Calling
Party Number (maximum 16 digits
per entry). The calling number is
the subscriber number of the
dial-in number. When a call is
made by an extension which does
not have an Extension Calling
Number assigned (Program
21-12), the system sends the
calling number for the ISDN trunk
defined in Program 21-13. If a
Calling Party Number is assigned
in both Program 21-12 and
Program 21-13, the system sends
the data in Program 21-13.
Define the digits received by the
system for the telephone number
on which a Mobile Extension user
calls into the system.
For the DID number defined in
Program 22-11-01, enter the
extension number for the Mobile
Extension user.
It is necessary to adjust the DID/
DISA dial tone (tone 44) to a
Repeat Count of 250 (by default,
this is set to 0). The system must
be reset for this change to take
affect.
UNIVERGE SV8100
Assigned Data
1
0 = Off
1 = On

(default = 0 for
COS 1~15)
(maximum 16 digits)
#
1-0, ,
Default:
(All trunks = No setting)
#
0~9, ,

(Maximum 16 digits)
(default not assigned)
Maximum eight digits
(default not assigned)

Maximum 24 digits
(default not assigned)

0~255 (0 = until
On-Hook)
Refer to Table 2-27
Service Tone Setup
Defaults, Program
80-01-01 on page
2-655
Mobile Extension
Level
2 3


