NEC Univerge SV8100 Features And Specifications Manual page 1318

Issue 7.0
Guide to Feature Programming
The Level 1, Level 2 and Level 3 columns indicate the programs that are assigned when programming
this feature in the order they are most commonly used. These levels are used with PCPro and WebPro
wizards for feature programming.
Level 1 – these are the most commonly assigned programs for this feature.

Level 2 – these are the next most commonly assigned programs for this feature.

Level 3 – these programs are not often assigned and require an expert level working knowledge of

the system to be properly assigned.
Program
Program Name
Number
11-11-22 Service Code Setup (for Setup/
Entry Operation) – Extension
Name Programming
15-01-01 Basic Extension Data Setup –
Extension Name
15-07-01 Programmable Function Keys
20-06-01 Class of Service for Extensions
20-13-21 Class of Service Options
(Supplementary Service) –
Extension Name
2 - 1290
Description/Comments
Customize the extension name
programming used for registration
and setup.
Define the extension/virtual
extension name.
Assign an Extension Name
Change key (55) to extensions.
Assign a Class of Service (1~15)
to an extension.
Turn Off or On an extension user
ability to program its name.
Station Name Assignment – User Programmable
UNIVERGE SV8100
Assigned Data
1
MLT
(default = 700)
Up to 12 characters
Default:

STA 101 = Ext 101
STA 102 = Ext 102,
etc.
Line Key 1~48
0~99 (Normal Function
Code 751 by default)
 
00 ~ 99
(Appearance Function
Code) (Service Code
752 by default)
Day Night/Mode: 1~8
Class of Service of
Extensions (1~15)
Default:
Extension port 101 =
Class 15
All other extension port
= Class 1
0 = Off
1 = On
(default = 1 for
COS 1~15)
Level
2 3



