NEC Univerge SV8100 Features And Specifications Manual page 1682

Issue 7.0
Find-Me Follow-Me requires that Tandem Trunking be enabled on the line that rings into

the Automated Attendant. If Tandem Trunking is not enabled, the Find-Me Follow-Me
options are not available.
Default Setting
Enabled
System Availability
Terminals
All Multiline Terminals
Required Component(s)
None
Related Features
None
Guide to Feature Programming
The Level 1, Level 2 and Level 3 columns indicate the programs that are assigned when programming
this feature in the order they are most commonly used. These levels are used with PCPro and WebPro
wizards for feature programming.
Level 1 – these are the most commonly assigned programs for this feature.

Level 2 – these are the next most commonly assigned programs for this feature.

Level 3 – these programs are not often assigned and require an expert level working knowledge of

the system to be properly assigned.
Program
Program Name
Number
14-01-13 Basic Trunk Data Setup –
Trunk-to-Trunk Transfer
2 - 1654
Description/Comments
Enable/Disable loop supervision
for the trunk.
UNIVERGE SV8100
Assigned Data
0 = Disabled
1 = Enabled
(default = 1)
VM8000 InMail – Find-Me Follow-Me
Level
1 2 3
