NEC Univerge SV8100 Features And Specifications Manual page 1354

Issue 7.0
With Version 4000 or higher software, DT700 series IP terminals and wireless IP

terminals can be registered to secondary systems in a NetLink environment, Softphones
must still register to the primary only.
When the Attendant telephone exists on a secondary system, alarm information is not

displayed on the Attendant telephone.
When Fail Over occurs between the Primary System and two or more Secondary Systems,

the Attendant telephone displays the System ID of the system that went into Fail-Over last.
When using InMail in a CCIS or Netlink network, 8-digit extensions and mailboxes are not

supported.
Default Setting
None
System Availability
Terminals
All Terminals
Required Component(s)
CD-CP00-US Blade with PZ-(X)IPLA and PZ-ME50-US Daughter Boards
LK-SYS-NETLINKX-LIC
Related Features
None
2 - 1326
UNIVERGE SV8100
SV8100 NetLink