NEC Univerge SV8100 Features And Specifications Manual page 1582

Hide thumbs Also See for Univerge SV8100:
Table of Contents

Advertisement

Issue 7.0
Guide to Feature Programming
The Level 1, Level 2 and Level 3 columns indicate the programs that are assigned when programming
this feature in the order they are most commonly used. These levels are used with PCPro and WebPro
wizards for feature programming.
Level 1 – these are the most commonly assigned programs for this feature.
Level 2 – these are the next most commonly assigned programs for this feature.
Level 3 – these programs are not often assigned and require an expert level working knowledge of
the system to be properly assigned.
Program
Program Name
Number
11-04-01
Virtual Extension Numbering
15-01-01
Basic Extension Data Setup –
Extension Name
15-02-21
Multiline Telephone Basic Data
Setup – Virtual Extension
Access Mode (when idle Virtual
Extension key pressed)
15-02-30
Multiline Telephone Basic Data
Setup – Toll Restriction Class
2 - 1554
Description/Comments
Assign Extension Number for the
Virtual Extensions (1~256).
Define the extension/virtual
extension name.
Determine whether an extension
Virtual Extension Key should be
used as a DSS key to the
extension and for receiving calls
(0), answering incoming calls and
ability to place outgoing ICM or
CO calls (1), or just receiving
incoming calls (2). If the key is
used for outgoing calls, the
extension number of the key must
be a real extension or virtual
extension number. When the
extension number of the key is a
real extension number, and the
key is pressed, the real extension
cannot be used.
Assign if the phone uses the Toll
Restriction class of the VE (0) or
the Real Extension when making
outbound calls from the VE.
UNIVERGE SV8100
Assigned Data
1
Up to eight digits
1
201
2
202
3
203
~
~
99
299
100 3601
~
~
256 3857
Up to 12 characters
Default:
STA 101 = Ext 101
STA 102 = Ext 102,
etc.
Virtual Extension Key
Mode
0 = DSS
1 = OTG (Outgoing)
2 = Ignore
(default = 2)
0 = Vir. Ext. (Virtual
Extension Class)
1 = Real Ext. (Real
Extension Class)
(default = 1)
Virtual Extensions
Level
2
3

Advertisement

Table of Contents
loading

Table of Contents