NEC Univerge SV8100 Features And Specifications Manual page 1627

UNIVERGE SV8100
Forwarding Calls to Your Mailbox
To activate or cancel Call Forwarding:
1. Press Speaker (or lift the handset at the single line telephone) and choose from the following dial
access codes:
741 = Call Forward – Immediate (Program 15-07 or SC 751: code 10)
742 = Call Forward – Busy (Program 15-07 or SC 751: code 11)
743 = Call Forward – No Answer (Program 15-07 or SC 751: code 12)
744 = Call Forward – Busy/No Answer (Program 15-07 or SC 751: code 13)
2. Dial the Voice Mail master number.
3. Press Speaker to hang up (or hang up handset at the single line telephone).
Transferring Calls to a Mailbox
To transfer your active call to a mailbox:
Multiline Terminal
1. Press Hold.
2. Press the Voice Mail key (Program 15-07 or SC 751: code 77 + VM8000 InMail pilot).
- OR -
Press the Message key on the telephone, if equipped.
3. Dial the number of mailbox to receive the transfer.
This number can be a mailbox number or a co-worker's mailbox number.

- OR -
Press the DSS Console or One-Touch key for extension user's mailbox, which receives the
transfer.
If the Transfer destination is an extension forwarded to Voice Mail, the call waits before routing the called user's

mailbox. This gives you the option of retrieving the call instead of having it picked up by Voice Mail.
4. Hang up.
Voice Mail prompts your caller to leave a message in the mailbox you selected.

- OR -
1. Dial extension number or press a DSS Console key for the extension mailbox which receives the
transfer.
2. Press the Voice Mail key (Program 15-07 or SC 751: code 77 + VM8000 InMail pilot)
- OR -
Press the Message key on the telephone, if equipped.
VM8000 InMail
Issue 7.0
2 - 1599