NEC Univerge SV8100 Features And Specifications Manual page 1341

UNIVERGE SV8100
Program
Program Name
Number
10-20-01 LAN Setup for External
Equipment – TCP Port
10-46-01 DT700 Server Information Setup
– Register Mode
15-05-27 IP Telephone Terminal Basic
Data Setup – Personal ID Index
15-05-28 IP Telephone Terminal Basic
Data Setup – Addition
Information Setup
SV8100 Desktop Applications
Description/Comments
Define the TCP port number for
the LAN CTI and O&M
communication between the
CD-CP00-US and the Desktop
Applications.
If set to 0, when the phone boots
up it reports the ext. assigned in
the phone or chooses the next
available extension in the system.
No password is required.
If set 1 the SIP user name and
password must be entered on the
actual IP phone. These settings
must match 84-22/15-05-27, or the
phone does not come on-line.
If set to 2, when the phone boots
up it prompts user to enter a user
ID and password before logging
in. It checks this user ID/password
against 84-22/15-05-27. If there is
no match, the phone does not
come on-line.
When the SIP Multiline telephone
is using manual/auto registration,
assign each phone a unique
personal index. Then go to
command 84-22 to assign the user
name and password.
Set Talking Party to 0 for Desktop
Application softphone.
Assigned Data
1
0~65535
default:
External Device 1 (CTI
Server) = 0
External Device 2
(ACD MIS) = 4000
External Device 5
(SMDR Output) = 0
External Device 6 (DIM

Output) = 0
External Device 11
(O&M Server) = 8010
External Device 12
(Traffic Report Output)
= 0
External Device 13
(Room Data Output for
Hotel Service ) = 0
0 = Normal
1 = Auto
2 = Manual
(default = 0)
0~512
(default = 0)
0 = Do not inform
1 = Inform
(default = 0)
Issue 7.0
Level
2 3



2 - 1313