NEC Univerge SV8100 Features And Specifications Manual page 1721

UNIVERGE SV8100
Program
Program Name
Number
45-01-06 Voice Mail Integration Options –
Record Alert Tone Interval Time
45-01-14 Voice Mail Integration Options –
CCIS Centralized Voice Mail
Number
45-01-15 Voice Mail Integration Options –
Analog Voice Mail Protocol
Selection
45-01-16 Voice Mail Integration Options –
Voice Mail FAX Digit Add
Assignment
45-01-17 Voice Mail Integration Options –
Reply Mail Box Number
45-01-18 Voice Mail Integration Options –
Trunk Number Mapping
45-04-01 Voice Mail Digit Add Assignment
– Remote Logon (Internal)
45-04-02 Voice Mail Digit Add Assignment
– Direct Logon
45-04-03 Voice Mail Digit Add Assignment
– Transfer Message
45-04-04 Voice Mail Digit Add Assignment
– Forward-All
45-04-05 Voice Mail Digit Add Assignment
– Forward-Busy
45-04-06 Voice Mail Digit Add Assignment
– Forward RNA
45-04-07 Voice Mail Digit Add Assignment
– Remote Logon
45-04-08 Voice Mail Digit Add Assignment
– Conversation Recording
45-04-09 Voice Mail Digit Add Assignment
– Clear Down String
45-05-01 Voice Mail Send Protocol Signal
Without Additional Digits –
Remote Log-On Internal
45-05-02 Voice Mail Send Protocol Signal
Without Additional Digits –
Direct Log-On
Voice Mail Integration (Analog)
Description/Comments
Set the time between Voice Mail
Conversation Record alerts.
Assign the pilot number to
Centralized Voice Mail over CCIS
Link. Assign this only in
the remote switches.
Assign whether Fixed codes or the
codes used in Program 45-04 are
used for analog voice mail
protocol.
Assign up to four digits in front of
the station number sent to the SLT
port when a call is forwarded.
Set whether or not to include the
mailbox number in the analog
voice mail protocol.
Assign the digits of trunk number
mapping.
Define the digits for remote logon
(internal).
Define the digits for direct logon.
Define the digits for transfer
message.
Define the digits for forward all.
Define the digits for forward busy.
Define the digits for forward RNA.
Define the digits for remote logon.
Define the digits for conversation
recording.
Define the digits for clear down
string.
Send trunk number and/or station
number information if integrating
to Voice Mail when Program
45-04-XX is left blank and
45-01-15 is set to Program.
Send trunk number and/or station
number information if integrating
to Voice Mail when Program
45-04-XX is left blank and
45-01-15 is set to Program.
Assigned Data
1
0~64800 (seconds)
(default = 30)
Dial (up to eight digits)
(default = No Setting)
0: Fixed
1: Program
(default = 0)
Up to four digits
(default not assigned)
0 = No
1 = Yes
(default = 1)
2~3
(default = 2)
Up to four digits
(default not assigned)
Up to four digits
(default = None)
Up to four digits
(default = None)
Up to four digits
(default = None)
Up to four digits
(default = None)
Up to four digits
(default = None)
Up to four digits
(default = None)
Up to four digits
(default = None)
Up to four digits
(default = None)
0:Off
1:On
(default = 0)
0:Off
1:On
(default = 0)
Issue 7.0
Level
2 3

















2 - 1693