6D3–12 STARTING AND CHARGING SYSTEM (X22SE 2.2L)
2. Measure the slip ring diameter, and replace if it
exceeds the limit.
3. Check resistance between slip rings, and replace if
there is no continuity.
4. Check for continuity between slip ring and rotor core.
In case of continuity, replace the rotor assembly.
066RS015
Stator Coil
1. Measure resistance between respective phases.
2. Measure insulation resistance between stator coil
and core with a mega–ohmmeter.
If less than standard, replace the coil.
066RS016
066RS017
066RS018