Isuzu 1999 RODEO Workshop Manual page 225

4A1–18 DIFFERENTIAL (FRONT)
18. Install differential assembly.
1. Clean the faces of the front axle case and
differential carrier.
Apply Three Bond TB1215 or equivalent to the
sealing side of the axle case and the carrier.
2. Attach the differential case and the carrier
assembly to the front axle case and tighten the
nuts and bolts.
Torque: 25 N·m (19 lb ft)
3. Fill the axle case with hypoid gear lubricant, to just
below the filler hole.
Lubricant capacity: 1.4 liter(1.48 US qt)
415RS014