Lower Control Arm; Lower Control Arm And Associated Parts; Removal - Isuzu 1999 RODEO Workshop Manual

3C–16 FRONT SUSPENSION

Lower Control Arm and Associated Parts

Legend
(1) Nut, Front
(2) Bush, Front
(3) Bolt, Front
(4) Nut, Rear
(5) Bush, Rear
(6) Bolt, Rear
(7) Bolt, Lower Ball Joint

Removal

1. Raise the vehicle and support the frame with suitable
safety stands.
2. Remove wheel and tire assembly. Refer to Wheel in
this section.

Lower Control Arm

(8) Bolt, Torsion Bar Arm
(9) Torsion Bar Arm Bracket
(10) Torsion Bar
(11) Lower Control Arm
(12) Lower Ball Joint
(13) Shock Absorber
(14) Stabilizer Link
3. Remove the tie-rod end from the knuckle. Refer to
Power Steering Unit in Steering section.
4. Remove the retaining ring from the front axle driving
shaft to release the shaft from hub(Except 2WD
model). Refer to Front Hub and Disc in Driveline/Axle
section.
5. Support lower control arm with a jack.
450RW010