Front Disc Brake Pads; Front Disc Brake Pads Inspection; Front Disc Brake Pads And Associated Parts - Isuzu 1999 RODEO Workshop Manual

Hide thumbs Also See for 1999 RODEO:

Table of Contents

5C–32 POWER–ASSISTED BRAKE SYSTEM

Check the outer pad by looking at each caliper from

above. Check the thickness on the inner pad by looking

down through the inspection hole in the top of the caliper.

Whenever the pad is worn to about the thickness of the

pad base, the pad should be removed for further

measurements. The pad should be replaced anytime the

pad thickness (1) is worn to within 1.00 mm (0.039 in) of

the pad itself.

The disc pads have a wear indicator that makes a noise

when the pad wears to where the replacement is required.

Minimum limit (1): 1.0 mm (0.039 in)

(1) Lock Bolt

(2) Caliper Assembly

Front Disc Brake Pads

(3) Pad Assembly

(5) Outer Side

Show Quick Links

Table of Contents