Isuzu 1999 RODEO Workshop Manual page 543

6A–34 ENGINE MECHANICAL (X22SE 2.2L)
Camshaft oil seal installation area on the cylinder
body of No.1, No.6 and camshaft bracket rear side
plug portion must be applied HN1023 or equivalent as
in the illustration.
5. Tighten camshaft bracket bolts to the specified torque
by sequence in the illustration.
Torque: 8 N·m (5.9 lb ft)
6. Use J–42609 for installation camshaft oil seal.
7. Install the camshaft drive gear. Align the timing mark
between notch on the camshaft drive gear(1) and lug
on the camshaft bracket(2).
014RW073
014RW075
014RW071
014RW076