Front Drive Shaft Joints Replace-
ment
f Refer to Front Drive Axle Assembly Replacement in
this section, and refer to Front Hub and Disc Overhaul
in Suspension section.
Front Hub Bearing Preload Check
Check the hub bearing preload at the wheel pin.
New bearing and New oil seal:
19.6 – 24.5 N (4.4 – 5.5 lb)
Used bearing and New oil seal:
11.8– 17.7 N(2.6 – 4.0 lb)
Front Drive Shaft Joint
Inspection Of Shift On The Fly System
Gear Oil
1. Open filler plug and make sure that the oil up to the
2. Tighten the filler plug to specified torque.
411RS011
DRIVE SHAFT SYSTEM
plug port.
If the oil is short, replenish with gear oil GL–5 grade.
Torque: 78 N·m (58 lb in)
4C–13
412RW035