Removal
1. Disconnect battery ground cable.
2. Remove air cleaner duct assembly.
Legend
(1) Positive Crankcase Ventilation Hose Connector
(2) Intake Air Temperature Sensor
(3) Air Cleaner Duct Assembly
(4) Air Cleaner Element
(5) Mass Air Flow Sensor
3. Disconnect positive crankcase ventilation hose.
4. Remove camshaft angle sensor connector.
5. Remove ground cable fixing bolt on cylinder head
cover.
6. Ignition coil connector and ignition coil.
f Disconnect the three connectors from the ignition
coils.
f Remove harness bracket bolt on cylinder head
cover.
f Remove fixing bolts on ignition coils.
Cylinder Head Cover LH
Legend
130RW001
7. Remove fixing bolt for fuel injector harness bracket.
8. Remove eight fixing bolts, then the cylinder head
ENGINE MECHANICAL (6VD1 3.2L)
(1) Ignition Coil Connector
(2) Bolt
(3) Ignition Coil Assemblies
cover.
6A–19
060RW018
010RW001