2A–46 POWER–ASSISTED STEERING SYSTEM
Insepction
If the abnormal conditions are found through inspection,
replace the steering column assembly.
Column Capsule
Check capsules on steering column bracket assembly; all
must be securely seated in bracket slots and checked for
any loose conditions when pushed or pulled by hand.
Check clearance between capsule and bracket. If must
be within 1mm (0.039 in).
Column Tube
Check for collapes by measuring the distance as shown in
the figure.
Standard distance: 162.2-165.8 mm (6.386-6.528
in)
Column Universal Joint for Tilt Mechanism
431RW030
If the resistance is felt when checked by rotate the joint,
replace the steering column assembly.
Sheared Injected Plastic Pin
Check the sheared injected plastic pins for any loose
conditions or damage.
431RW031
431RW032
431RW033