6A–40
ENGINE MECHANICAL (X22SE 2.2L)
3. Remove cylinder head.
Use J–42623.
4. Valve spring, valve spring caps, compress valve
spring — use J–8062 (1) and Adapter J–42619 (2).
Valve keepers.
5. Valves, valve stem seals — use commercially
available remover pliers. Valve spring seats from
cylinder head.
Inspection and Repair
1. Check length and width of cylinder head sealing
surfaces for deformation and diagonals for warpage
— use straight edge and feeler gauge.
2. Height of cylinder head (sealing surface to sealing
011RW014
surface).
Dimension (I) – 134 mm
011RW013
011RW011
011RW012