Crankshaft; Crankshaft And Associated Parts; Disassembly - Isuzu 1999 RODEO Workshop Manual

Crankshaft and Associated Parts

Legend
(1) Cylinder Head Assembly
(2) Oil Pump Assembly
(3) Pan
(4) Pan Support
(5) Oil Strainer

Disassembly

1. Remove cylinder head assembly (1). Refer to
"Cylinder head" in this manual.
2. Remove oil pan (3).
CAUTION: Take care not to damage or deform the
sealing flange surface of crankcase.
3. Remove oil pan support (4).
ENGINE MECHANICAL (X22SE 2.2L)

Crankshaft

(6) Balance Unit Assembly
(7) Piston and Connecting Rod Assembly
(8) Main Bearing Cap
(9) Crankshaft
(10) Cylinder Block Assembly
4. Remove oil strainer (5).
5. Remove oil pump assembly (5).
6. Balance unit assembly.
7. Remove piston and connecting rod assembly (7).
Refer to "Piston, Piston Ring and Connecting Rod" in
this manual.
8. Remove flywheel.
9. Remove rear oil seal and oil baffle plate.
6A–47
015RW008