Isuzu 1999 RODEO Workshop Manual page 1116

5. Install fan pulley bracket and tighten fixing bolts to the
specified torque.
Torque : 22 N·m (16 lb ft)
6. Install power steering pump assembly and tighten to
the specified torque.
Torque :
M8 bolt : 22 N·m (16 lb ft)
M10 bolt : 46 N·m (34 lb ft)
7. Install cooling fan assembly and tighten bolts/nuts to
the specified torque.
Torque : 22 N·m (16 lb ft) for fan pulley and fan
bracket.
Torque : 7.5 N·m (66.4 lb in) for fan and clutch
assembly.
8. Move drive belt tensioner to loose side using wrench,
then install drive belt to normal position.
Legend
(1) Crankshaft Pulley
(2) Cooling Fan Pulley
(3) Tensioner
(4) Generator
(5) Air Conditioner Compressor
(6) Power Steering Oil Pump
(7) Drive Belt
9. Install radiator upper fan shroud.
10. Install air cleaner assembly.
ENGINE MECHANICAL (6VD1 3.2L)
850RW001
6A–31