Isuzu 1999 RODEO Workshop Manual page 1046

2. Inspect restriction for valve movement. If there is
restriction remove the object.
Installation Procedure
1. Place the gasket and EGR valve on to the intake
manifold.
2. Install mounting bolts and tighten.
3. Connect electrical connector at EGR valve
4. Connect the crankshaft breather hose and secure it
with clamps.
5. Install the air intake duct. Refer to Air Intake Duct
Installation Procedure.
6. Connect the negative battery cable.
RODEO X22SE 2.2L ENGINE DRIVEABILITY AND EMISSION
014RX056
014RX057
6E1–419