Reassembly
1. Install wheel pin.
f Place hub on a wood workbench or a block of wood
approx. 6" by 6" to protect the wheel stud ends and
threads.
f Install wheel stud, using a hammer.
NOTE: Be sure wheel stud is started squarely and seats
completely.
2. Align index marks(1) and install hub to disc.
3. Install bolt.
Tighten the bolts to the specified torque.
Torque: 103 N·m (76 lb ft)
4. Install outer bearing.
Install the outer race by driving it into the hub by using
installer J–36828 and grip J-8092.
411RS005
411RS003
DRIVE SHAFT SYSTEM
4C–5
411RS021
901RW056