Isuzu 1999 RODEO Workshop Manual page 1119

6A–34 ENGINE MECHANICAL (6VD1 3.2L)
Legend
(1) Right Bank
(2) Left Bank
3. Tighten twenty bolts on numerical order an one
side bank as shown in the illustration.
Torque : 10 N·m (89 lb in)
(3) Alignment Mark on Camshaft Drive Gear
(4) Alignment Mark on Camshaft
(5) Alignment Mark on Retainer
5. Install cylinder head cover RH.
f Refer to installation procedure for CYLINDER
HEAD COVER RH in this manual.
6. Install cylinder head cover LH.
f Refer to installation procedure for CYLINDER
HEAD COVER LH in this manual.
7. Install timing belt.
f Refer to installation procedure for TIMING BELT in
this manual.
8. Install crankshaft pulley.
f Refer to installation procedure for CRANKSHAFT
PULLEY in this manual.
9. Install Accelerator pedal cable.
014RW031
014RW024