Isuzu 1999 RODEO Workshop Manual page 347

4D–12 TRANSFER CASE
4. Remove front companion flange (2) and rear
companion flange (3), using the flange companion
holder J–8614–11 to remove the end nut..
5. Remove the front and rear companion flange.
NOTE: Use the universal puller to remove the rear
companion flange.
6. Disconnect the actuator breather hose and transfer
breather hose from control box (4).
7. Remove control box assembly (4).
8. Disconnect the actuator
2WD–4WD actuator heat protector (5) from the
2WD–4WD actuator assembly (6).
262RW009
breather hose and
220RW002
9. Remove the 2WD–4WD actuator assembly bolts.
10. Pull the 2WD–4WD actuator assembly (6) with
2WD–4WD shift rod.
Legend
(6) 2WD–4WD Actuator Assembly
(7) Rear Cover Assembly
(9) Shift Rod: 2WD–4WD (Position: 2WD)
(10) Pull
(11) Position: 4WD
(12) Mode: 2WD
220RW065