Transfer Gear Assembly and Associated Parts
Legend
(1) Transfer Gear Assembly
(2) Bolt, Universal Joint (Steering Shaft Side)
Removal
1. Remove universal joint bolt (steering shaft side).
2. Remove universal joint bolt (steering unit side).
3. Loosen fixing bolt and nut and remove transfer gear
assembly with shim.
Inspection and Repair
The transfer gear assembly cannot be disassembled. If
damage or abnormal condition are found, replace to new
ones.
POWER–ASSISTED STEERING SYSTEM
Transfer Gear Assembly
Installation
1. Install transfer gear assembly with shim and tighten
2. Connect universal joint (both side) and tighten the bolt
(3) Fixing Bolt Nut
(4) Shim
(5) Bolt, Universal Joint (Steering Unit Side)
bolt and nut to the specified torque.
Torque: 54 N·m (40 lb ft)
to the specified torque.
Torque: 31 N·m (23 lb ft)
2A–27
441RW001