Isuzu 1999 RODEO Workshop Manual page 368

9. Install ball bearing (35), using a bench press.
10. Install snap ring (34).
11. Install the counter gear assembly (33) to the transfer
case (42).
12. Use a pair of snap ring pliers to install the snap ring
(32) to the transfer case (42).
NOTE: The snap ring must be fully inserted into the
transfer case snap ring groove.
13. Use a bench press to install the ball bearing (30) to the
front output shaft (31).
14. Assemble the 2WD–4WD clutch hub and sleeve
assembly (28).
226RW156
15. Engage the springs in the same insert with the open
ends away from each other.
262RS012
TRANSFER CASE 4D–33
226RW140
226RW141