Isuzu 1999 RODEO Workshop Manual page 216

Disassembly
1. Remove differential carrier fixing bolt.
2. Remove differential assembly.
3. Using holding fixture J–37264 and holding fixture
base J–3289–20, fix the differential assembly to the
bench.
4. Remove bearing cap bolt.
5. Apply a setting mark to the side bearing cap and the
differential carrier then remove bearing cap.
DIFFERENTIAL (FRONT)
6. Remove differential cage assembly.
7. Remove side bearing outer race, after removal, keep
the right and left hand side bearing assemblies
separate
combinations.
8. Remove side bearing, using remover J–42379 and
adapter J–8107–2.
f Select insert; 303173 and collet halves; 44801 in
remover kit J–42379.
425RS008
9. Remove adjust shim, note the thickness and position
of the shims removed.
10. Remove the flange nut using holding wrench
J–8614–01.
425RS009
to maintain inner and
4A1–9
outer race
415RW003
415RS018