Isuzu 1999 RODEO Workshop Manual page 273

4B–6
DRIVELINE CONTROL SYSTEM
Functions of Indicator Lamp
Indication of vehicle condition : Indicator lamp is
controlled by ECU of shift on the fly and shows vehicle
conditions as below.
Indicator
Off
On
Blink (2Hz)
Blink (4Hz)
Bulb check :The bulb of indicator lamp is checked for 2
seconds when ignition key is turned on.
Time Chart of Bulb Checking
Retrials from 2WD to 4WD :In cold weather or under
high speed condition, the gear shifting (engagement)
sometimes dose not complete by 3 trials. In such case,
the indicator lamp inform driver of this incident as
aforementioned chart (shown at Retrial in Outline of shift
on the fly system.)
Vehicle condition
2WD
4WD
Operating
Stop operating
4WD switch Transfer position
switch
Off (Close) 2WD (Open)
On (Open) 4WD (Close)
On (Open) 4WD (Close)
Off (Close) 2WD (Open)
On (Open) 2WD (Open)
Off (Close) 4WD (Close)
Front axle switch
2WD (Open)
4WD (Close)
2WD (Open)
4WD (Close)
2WD (Open)
4WD (Close)
F04RW004