5C–54 POWER–ASSISTED BRAKE SYSTEM
Brake Lining and Associated Parts
Legend
(1) Wheel and Tire Assembly
(2) Drum
(3) Hold-down Spring and Cup
(4) Hold-down Spring and Cups
(5) Lower Return Spring
(6) Upper (other) Return Spring
(7) Trailing Shoe Assembly with Parking Brake
Lever
(8) Leading Shoe Assembly with Upper (inner)
Return Spring
Removal
1. Raise the vehicle and support with suitable safety
stands.
2. Remove wheel and tire assembly (1).
f Refer to "Wheel and Tires" in Wheel and Tire
System section.
3. Remove Drum (2).
f If difficulty is encountered in removing the drum:
– Mark the position of the drum to the axle.
– Make sure the parking brake is released.
Brake Lining
(9) Upper (inner) Return Spring
(10) Auto Adjuster Lever
(11) Parking Brake Lever
(12) Adjuster Assembly
(13) Wave Washer
(14) Retainer
(15) Hold-down Pin
(16) Hold-down Pin
– Use a rubber mallet to tap gently on the outer rim of
the drum and/or around the inner drum. Be careful
to avoid damaging the drum.
4. Remove upper (other) return spring (6) and auto
adjuster lever.
5. Remove lower return spring (5).
6. Remove hold-down spring and cups (4) and
hold-down pin (15).
7. Remove adjuster assembly (12)
8. Remove leading shoe assembly (8) with upper (inner)
return spring (9).
305RW001