Isuzu 1999 RODEO Workshop Manual page 340

4. Install the rear companion flange (2) and O–ring (2).
5. Use the companion flange holder J–8614–11 to install
a new end nut (2) and tighten to the specified torque.
Torque: 167 N·m (123 lb ft)
6. Use the punch J–39209 to stake the end nut at two
spots.
NOTE: Be sure to confirm that there is no crack at the
staked portion of the end nut (2) after staking.
7. Connect the rear propeller shaft to the transfer case
and tighten to the specified torque.
Torque: 63 N·m 46 (lb ft)
266RS001
266RW002
TRANSFER CASE 4D–5