Isuzu 1999 RODEO Workshop Manual page 592

RODEO
Service Precaution . . . . . . . . . . . . . . . . . . . . . .
General Description . . . . . . . . . . . . . . . . . . . . .
Fuel Metering . . . . . . . . . . . . . . . . . . . . . . . . . . .
Fuel Filter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Fuel Filter and Associated Parts
Removal . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Inspection . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Inspection . . . . . . . . . . . . . . . . . . . . . . . . . . . .
In-Tank Fuel Filter . . . . . . . . . . . . . . . . . . . . .
Fuel Pump Flow Test . . . . . . . . . . . . . . . . . . .
Fuel Pump . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Fuel Pump and Associated Parts
Removal . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Fuel Tube / Quick - Connector Fittings
Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . .
Service Precaution
WARNING: THIS VEHICLE HAS A SUPPLEMENTAL
RESTRAINT SYSTEM (SRS). REFER TO THE SRS
COMPONENT AND WIRING LOCATION VIEW IN
ORDER TO DETERMINE WHETHER YOU ARE
PERFORMING SERVICE ON OR NEAR THE SRS
COMPONENTS OR THE SRS WIRING. WHEN YOU
ARE PERFORMING SERVICE ON OR NEAR THE SRS
COMPONENTS OR THE SRS WIRING, REFER TO
THE SRS SERVICE INFORMATION. FAILURE TO
FOLLOW WARNINGS COULD RESULT IN POSSIBLE
AIR BAG DEPLOYMENT, PERSONAL INJURY, OR
OTHERWISE UNNEEDED SRS SYSTEM REPAIRS.
CAUTION: Always use the correct fastener in the
proper location. When you replace a fastener, use
ONLY the exact part number for that application.
ISUZU will call out those fasteners that require a
replacement after removal. ISUZU will also call out
the fasteners that require thread lockers or thread
sealant. UNLESS OTHERWISE SPECIFIED, do not
use supplemental coatings (Paints, greases, or other
corrosion inhibitors) on threaded fasteners or
fastener joint interfaces. Generally, such coatings
adversely affect the fastener torque and the joint
clamping force, and may damage the fastener. When
you install fasteners, use the correct tightening
sequence and specifications. Following these
instructions can help you avoid damage to parts and
systems.
ENGINE
ENGINE FUEL (X22SE 2.2L)
CONTENTS
6C-1
6C-2
6C-3
6C-4
. . . . . . . . . 6C-4
6C-4
6C-4
6C-4
6C-4
6C-4
6C-5
6C-6
. . . . . . . . 6C-6
6C-6
6C-6
. . . . . 6C-7
6C-7
ENGINE FUEL (X22SE 2.2L)
Cautions During Work . . . . . . . . . . . . . . . . . .
Removal . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Reuse of Quick-Connector
Assembling Advice . . . . . . . . . . . . . . . . . . . .
Fuel Pump Relay . . . . . . . . . . . . . . . . . . . . . . . .
General Description . . . . . . . . . . . . . . . . . . . .
Fuel Tank . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Fuel Tank and Associated Parts
Removal . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Fuel Gage Unit . . . . . . . . . . . . . . . . . . . . . . . . . .
Removal and Installation
Fuel Filler Cap . . . . . . . . . . . . . . . . . . . . . . . . . .
General Description . . . . . . . . . . . . . . . . . . . .
Inspection . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Main Data and Specifications
Special Tool . . . . . . . . . . . . . . . . . . . . . . . . . . . .
SECTION
6C-1
6C-7
6C-7
. . . . . . . . . . . . . 6C-9
6C-9
6C-10
6C-10
6C-10
. . . . . . . . . 6C-10
6C-11
6C-11
6C-11
. . . . . . . . . . . . . . . 6C-11
6C-12
6C-12
6C-12
. . . . . . . . . . . . . 6C-13
6C-13