Isuzu 1999 RODEO Workshop Manual page 475

5C–38 POWER–ASSISTED BRAKE SYSTEM
3. Install support bracket and tighten the bolt (7) to the
specified torque.
Torque: 155 N·m (115 lb ft)
4. Install caliper assembly.
5. Install lock bolt (9) and guide bolt (8) and tighten the
bolt to the specified torque.
Torque: 74 N·m (54 lb ft)
6. Install brake flexible hose, always use new gaskets
and be sure to put the hooked edge of the flexible
hose end into the anti–rotation cavity then tighten the
I–bolt (10) to the specified torque.
Torque: 35 N·m (26 lb ft)
302RW012
7. Install wheel and tire assembly, referring to "Wheels
and Tires System" in Section 3E.
8. Bleed brakes. Refer to "Hydraulic Brakes" in this
section.
302RW013
302RW014