4D–20 TRANSFER CASE
Disassembly
1. Remove detent ball, spring and plug (1).
2. Use a spring pin remover to remove the spring pin (2)
from the bridge (6).
3. Remove spring (4).
4. Engage the 2WD–4WD sleeve with front output gear.
Remove the spring pin (3) from the block (7). Remove
the shift rod (5).
5. Remove shift arm (6).
6. Remove shift block (7).
7. Remove 4WD indicator switch (8).
8. Use a magnetic tool to remove the interlock pin (9)
and spring (10) from the transfer case (16).
262RW011
9. Remove select rod assembly (11).
10. Use a spring pin remover to remove the shift arm
spring pin (12) from the shift arm (14) and shift block
(15). Remove the high–low shift rod (13) from transfer
case (16).
262RW022
11. Remove shift arm (14).
12. Remove shift block (15) from transfer case (16).
262RS005
262RS006