6E1–406 RODEO X22SE 2.2L ENGINE DRIVEABILITY AND EMISSION
2. Remove the fuel pump relay from the underhood
relay box.
3. Start the engine and allow it to stall.
4. Crank the engine for about 30 seconds.
5. Disconnect the negative battery cable.
Fuel Pump Assembly
Removal Procedure
1. Disconnect the negative battery cable.
2. Drain all fuel from fuel tank from filler neck.
3. Remove the fuel pump relay from the fuse and relay
box at right side of engine room.
4. Remove fuel tank. Refer to Fuel Tank Removal
Procedure.
5. Using J–39763, twist the fuel pump counter–clock
wise to release from fuel tank.
6. Lift fuel pump to remove from fuel tank.
014RW089
014RW089
041RX001
041RX002