Exhaust Silencer; Exhaust Silencer And Associated Parts; Removal; Installation - Isuzu 1999 RODEO Workshop Manual

6F–4
ENGINE EXHAUST (X22SE 2.2L)

Exhaust Silencer and Associated Parts

Legend

(1) Exhaust Silencer

(2) Front Exhaust Pipe Fixing Bolt
(3) Exhaust Silencer Fixing Nuts
(4) Exhaust Rear Pipe

Removal

1. Disconnect battery ground cable.
2. Raise the vehicle and support with suitable safety
stands.
3. Remove exhaust silencer fixing nuts (3) then
disconnect rear exhaust pipe from exhaust silencer.
4. Remove exhaust silencer fixing nuts (2) then
disconnect exhaust silencer from front exhaust pipe
(5).
5. Remove exhaust silencer mounting nuts (8) from
chassis side then remove exhaust silencer (1).
Exhaust Silencer
(5) Mounting Rubber
(6) Mounting Rubber
(7) Mounting Rubber
(8) Exhaust Silencer Fixing Nuts

Installation

1. Install the exhaust silencer (1) chassis side and
tighten two nuts (8) to the specified torque.
Nuts: 15 N·m (11 lb ft)
2. Install the exhaust silencer and tighten two Bolts (2)
on front exhaust pipe to specified torque.
Bolts: 43 N·m (32 lb ft)
3. Install the rear exhaust pipe and tighten two nuts (3)
on exhaust silencer to specified torque.
Nuts: 43 N·m (32 lb ft)
150RW032