Isuzu 1999 RODEO Workshop Manual page 1017

6E1–390 RODEO X22SE 2.2L ENGINE DRIVEABILITY AND EMISSION
Installation Procedure
1. Place PCM into its position and secure by four
mounting screws.
2. Connect all three connectors to PCM. All connectors
are color keyed. Same color male and female
connectors join together.
3. Install the front center console and secure by four
retaining screws.
4. Install the rear center console and secure it by two
retaining screw into storage box.
014RX002
5. Snap face plate into its position and secure it by a
screw.
014RX017 6. Insert ashtray inner.
7. Insert the shift knob.
8. Connect the negative battery cable.
014RX016
014RX015