Pinion Oil Seal; Pinion Oil Seal And Associated Parts; Removal - Isuzu 1999 RODEO Workshop Manual

4A2–10 DIFFERNTIAL (REAR)

Pinion Oil Seal and Associated Parts

Legend
(1) Flange Nut and Washer
(2) Flange

Removal

1. Remove the rear propeller shaft.
Propeller Shaft in this section.
2. Drain the rear axle oil.
3. Check and record preload with an inch pound torque
wrench. This will give combined pinion bearing, seal,
carrier bearing, axle bearing and seal preload.

Pinion Oil Seal

(3) Oil Seal
(4) Outer Oil Seal Slinger
(5) Outer Pinion Bearing (Cup and Cone)
Refer to Rear
420RW013
425RW018