Installation - Isuzu 1999 RODEO Workshop Manual

11. Off set the actuator assembly.
12. Remove the actuator assembly (6).
Legend
(13) Position: 4WD
(14) Mode: 2WD
13. Remove transfer rear cover assembly (7) from
transfer case assembly.

Installation

1. Apply the recommended liquid gasket (LOCTITE
17430) or its equivalent to the transfer rear cover
fitting faces.
220RW028
2. Install transfer rear cover assembly (7) to transfer
case assembly (8).
3. Perform the following steps before fitting the transfer
rear case.
1. Shift the high–low shift rod to the 4H side.
2. The cut–away portion of the select rod head (15)
should align with that of the rear case hole's
stopper (16).
220RW066
TRANSFER CASE 4D–13
220RS017
230RW009