Isuzu 1999 RODEO Workshop Manual page 160

2. Apply grease to the portion that fits into the bracket
then install height control arm and align the setting
marks(2).
3. Apply grease to the bolt portion of the end piece(4).
Apply grease to the portion of the seat(5) that fits into
the bracket.
4. Apply grease to the serrated portions.
5. Install adjust bolt and seat, then turn the adjust bolt to
the setting mark(1) applied during disassembly.
NOTE: Adjust the trim height. Refer to Front End
Alignment Inspection and Adjustment in Steering section.
410RS005
410RS008
FRONT SUSPENSION 3C–9
410RS004