Installation - Isuzu 1999 RODEO Workshop Manual

10. Remove clip.

Installation

1. Install clip (4).
2. Apply special grease (approximately 0.2 g) to both
contacting surfaces of the inner shims (5). Wipe off
extruded grease after installing. Install pad assembly
with shim.
Legend
(5) Inner Shim
(6) Wear indicator
POWER–ASSISTED BRAKE SYSTEM
3. Install support bracket and tighten the bolt (7) to the
specified torque.
Torque: 103 N·m (76 lb ft)
4. Install caliper assembly.
306RW010
5. Install lock bolt and guide bolt (8) and tighten the bolt
to the specified torque.
Torque: 44 N·m (32 lb ft)
6. Install brake flexible hose, always use new gaskets
306RW011
and be sure to put the hooked edge of the flexible
hose end into the anti–rotation cavity then tighten the
eye–bolt (9) to the specified torque.
Torque: 35 N·m (26 lb ft)
5C–49
306RW012
306RW013