Reassembly - Isuzu 1999 RODEO Workshop Manual

Reassembly

1. Valves, valve stem seals. Refer to Valve Spring, Oil
Controller, Valve, Valve Guide in this section.
2. Valve spring, valve spring caps. Refer to Valve
Spring, Oil Controller, Valve, Valve Guide in this
section.
3. Install tappet (HLA).
4. Cylinder head with new cylinder head bolts to cylinder
block.
Tighten the bolts in 4 steps.
1st step: 25 N·m (18 lb ft)
2nd step: 90°
3rd step: 90°
4th step: 90°
5. Camshaft in cylinder head. Refer to Camshaft in this
section.
6. Camshaft pulley. Refer to Camshaft in this section.
ENGINE MECHANICAL (X22SE 2.2L)
011RW014
6A–41